Southwest Digital Dry Bath Hot Block Incubator Specifications

Southwest's digital dry bath hot block incubators have been designed using microprocessor PID technology
for fast heating and accurate control.  Their small size takes less bench space than competing dry baths and Southwest provides a
wide range of block inserts for most tubes and plates.  Compare our specs, price and 2-year warranty and you will not find a better
dry bath value on the market.  

SPECIFICATIONS                                SH1001                          SH1002                             SH1004
Well size                                                  1 block                             2 block                               4 block     
Temperature range                                  Amb.+5C to 150C    Amb.+5C to 150C         Amb.+5C to 130C
Increments/display resolution                  0.1C                                0.1C                                   0.1C
Temperature uniformity (@37C)          +/-0.2C                           +/-0.2C                               +/-0.2C
Temperature accuracy                           +/-0.2C                             +/0.2C                              +/-0.2C
Timer function / resolution                      off or up to 999 minutes in 1 minute increments (does not affect heating)
Size wxdxh (in.) / Weight                7.9x9.1x3.5  (5lbs)         8.7x10.7x3.5 (5.5lbs)        8.7x14.3x3.5  (7.7lbs)
Electrical 115/230VAC 50/60Hz           150 watts                       270 watts                        500 watts

Block Dimensions    Standard block size is 3.75 in. wide x 3.0 in. deep  x 2.0 in. high.  Tall blocks (SW15, SW50 and
SW5015) are 3.25 in high.  SWPCR2 and SWMT plate blocks are double deep. Most blocks have a number/letter grid
pattern and separate thermometer hole.
Canada Shipping on
Digital Dry Baths   $40
SH1001 One Block Dry Bath Hot Block
- temperature range: ambient+5C to 150C,   accuracy  +/-0.2C at 37C
- holds one accessory block  (large selection below)
- user calibration feature and 2 year warranty.  
 Product specs at page bottom
SH1001    Price:      $321
SH1002 Two Block Dry Bath Hot Block
- temperature range: ambient+5C to 150C,   accuracy  +/-0.2C at 37C
- holds two accessory blocks  (large selection below)
- user calibration feature and 2 year warranty.   
Product specs at page bottom
Price:      $409
Price:      $613
SW02 0.2ml tube block insert
Holds up to six 8-tube PCR strips  or 48 x 0.2ml tubes.
SW05 0.5ml tube block insert
Holds up to 24 x 0.5ml tubes
SW16(5) 5ml tube block insert
Holds up to 15 x 5ml tubes or 15 x 16mm dia. vials.
SW10 10mm tube block insert
Holds up to 20 x 10mm blood or test tubes or 20 x 2.0ml tubes
SW1213 12mm or 13mm tube block insert
Holds up to 20 x 12mm or 13mm diameter test tubes
SW15 15ml tube block insert  
Holds up to 12 x 15ml tubes.  Note: This block is 3 in. tall to
accommodate the taller 15ml tubes.
SW1500 1.5ml tube shaped hole block insert
Holds up to 24 x 1.5ml tubes. Has shaped holes to closely
match tube bottoms.
SW1520 1.5ml or 2.0ml tube block insert
Holds up to 24 x 1.5ml or 2.0ml tubes. Holes accommoate
both tube sizes
Price:       $46
Price:      $92
SW1516 15mm tube block insert
Holds up to 12 x 15mm or 16mm dia. tubes.
SW1520A shorter 1.5ml or 2.0ml tube block insert
Lower cost, lower capacity alternative to the SW1520. Holds
up to 20 x 1.5ml or 2.0ml tubes.  Height lower than SW1520
Price:         $92
SW16(5) 16mm tube block insert
Holds up to 15 x 16mm dia. tubes or 15 x 5ml
centrifuge tubes.
SW17-SLANT 17mm vial at a slant block insert
Holds up to 8 x 17mm dia. vials at a 45 degree angle
Price:         $92
Price:         $92
SW50 50ml tube block insert
Holds up to 5 x  50ml tubes. Note: This block is 3 in. tall to
accommodate the taller 50ml tubes.
SW5015  15ml plus 50ml tube block insert
Holds up to 4 x 15ml tubes plus 3 x 50ml tubes. Note: This block
is 3 in. tall to accommodate the taller 15ml and 50ml tubes.
Price:           $68
Also see our SW5015 combo block that holds both
15ml and 50ml tubes.
Also see our SW5015 combo block that holds both
15ml and 50ml tubes.
SW-COMBO 0.2ml & 0.5ml, & 1.5ml & 2.0ml
Flip-Over block insert
A flip-over combination block that holds 24 x 1.5ml/2.0 ml tubes
and 14 x 0.5ml tubes on one side and 6 PCR strips or 48 x 0.2ml
tubes on the other side.  Note: placing two of these blocks
together allows the user to heat one 96-well PCR plate in a
2-block or 4-block dry bath in addition to all the tube sizes above.
Price:      $130
Price:         $165
Price:        $197
Price:        $165
SWPCR1  PCR plate block insert for 1-block bath
This "T" block holds 1 x 96 well PCR plate and fits the SH1001
one block dry bath. The plate and block top sit above the dry bath.
SWPCR2  PCR plate block insert for 2 and 4 block baths
This double block plate block holds 1 x 96 well PCR plate.  The block fits into
the SH1002 two block or SH1004 four block dry baths.  The block and PCR
plate sit down in the dry bath well.
SWMT  microplate block insert for 2 and 4 block baths
This double block plate block holds 1 microtiter plate. The block fits into the
SH1002 two block or SH1004 four block dry baths.  The block and PCR plate
sit down in the dry bath well.
SW17 17mm tube or vial block insert
Holds up to 12 x 17mm dia. vials or tubes
Price:          $92
Side 1                           Side 2
Free U.S. Shipping
Go To Product Categories
Warranty
Policy
How to Order
OEM/Custom
Manufacturing
Contact Us
About Southwest
Science
on most items
       877-737-3211                            info@SouthwestScience.com   
SW01 no holes block insert
No holes block. For microscope slides or custom drilling
Price:       $92
SH1004 Four Block Dry Bath Hot Block
- temperature range: ambient+5C to 130C,   accuracy  +/-0.2C at 37C
- holds two accessory blocks  (large selection below)
- user calibration feature and 2 year warranty.   
Product specs at page bottom
New                    In-Stock                          FREE U.S. Shipping
Accessory Block Inserts for Dry Baths Sold Separately Below
Free Prairie Dog Offer
Price:       $92
Price:       $92
Price:       $92
Price:       $92
Price:       $92
Price:       $92
Price:       $92
Price:       $92
SPECIAL Low PRICE !!
SPECIAL Low PRICE !!
Southwest's digital dry bath hot block incubators have been designed using PID technology for fast
heating and accurate control.  Their small size takes less bench space than competing dry baths and Southwest
provides a wide range of block inserts for most tubes and plates.  Compare our specs, price and 2-year warranty
and you will not find a better dry bath value on the market.  
SWBCT 13mm and 16mm blood tube block insert
This block holds 12 x 13mm blood tubes plus 8 x 16mm blood tubes
SWHEM hematocrit tube  block insert
This block holds up to 48 x hematocrit tubes (1.9m dia)
SWNMR  neuclear magnetic resonance tube block insert
This block holds 30 NMR tubes for neuclear magnetic resonance spectroscopy
work.  
Price:        $115
Price:        $145
Price:        $195